image1 image2 image3
3Dmicro Toolkit Video Tutorials
Written by Riccardo Donnini   
Tuesday, 05 June 2012 11:20

In this section we propose a list of Video Tutorials to quickly start to use the 3Dmicro Toolkit and its Arduino Expansion.

3Dmicro Toolkit for PIC32

The following three YouTube Videos are related to the three examples installed by the version 2.1 of the 3Dmicro Toolkit in your Document directory:

 

    • Ethernet Communication Example (YouTube HD)
      • This example:
        • Reads the state of 3 switch buttons of the PIC32 Ethernet Starter Kit and turn on/off the corresponding LEDs indicators
        • Sends via Ethernet the number of pressed switches
        • Receives a string and sends it back via Ethernet communication
        • Receives a floating point number and sends it back via Ethernet communication
      • Download the example

 

 

 

 

    • USB Example (YouTube HD)
      • This example:
        • Uses the button switches 1 and 3 to start and stop the sampling session of the button switch 2 (Pressed/Not Pressed)
        • For each session creates a text file with a name that is incremented with the number of sampling session
        • Saves every 250 ms the state of the button switch 2 to the text file
      • Download the example

 

 

 

 

    • Interrupts Example (YouTube HD)
      • This example:
        • Reads the state of the button switch 2 on the Starter Kit and use that to change the Duty Cycle value of the PWM2 (LED2)
        • Receives a string via Serial communication and send it back on the same serial channel
        • Changes the LED3 state (On/Off) depending on the serial string received
        • Sends a string via Serial communication if the Interrupt 0 occurs
      • Download the example

 

 

Arduino Expansion

 

The following two YouTube Videos are related to the three examples installed by the version 1.0.4 of the 3Dmicro Toolkit Arduino Expansion in your Document directory:

 

 

 

 

 

    • ATmega2560 Example (YouTube HD)
      • This example:
        • Reads the state of the PINs form 11 to 13 and send it via serial communication
        • Reads the state of the Analog input AN15 and send it via serial communication
        • Changes the PWM one time of the PWM 6 reading a serial command
        • Does the echo of a float variable via serial communication
        • Blinks the LED (PIN13) every 200 ms
      • Download the example

 

 

 

To have support contact us at support@3d-svs.com